I don't know if you have a 3 way or 4 way remote. But 3-way,0047,0051,0451,0178,1147,1347. 4-way-0704,0312,0018,0002,0502,0006,0007,0601,0835,0901, 0114,0103,0803,0806,0310. 1. press and hold the CODE SEARCH buttonuntil the red indicator stays on, thenrelease thecode search button.2.Press and release the desired mode button(TV,VCR,etc.)the red indicator light blinks then stays lit. enter the 4 digit code. Note:after a valid code entry the red indicator light turns off. for an invalid code the red light flashes.4. With the device turned on, press channel up. If the device responds no further prgramming is necessary. Code Search-If you product does not respond after you;ve tried all the codes for you brand try searching for your code by these steps.1. Manually turn on the device(TV) 2.press and hold the code search button until the red indicator stays on,then release the code search button.3. Press and quickly release the desired mode button.4. press the channel up button repeatedly, up to 300 times .until the device changes channels.If you overshoot the required code,press channel down until the device changes channels. Press and release MUTE to install the code. I hope this works for you, if not re-post the question and I'll try to do better. Good luck!
|
Linear Mode
