[Cari]

i need a hack code to make this player all region. i can't find any. please help!

[lektem]

Can you please try these methods?Region code hack posted by John Gross, April 03 2003:To convert the Samsung DVD-V6500 player to Multi-Region playback make sure you haveno disc or tape in and then Turn it on. When the display shows "no disc"…...1. Press the DVD button on your remote control so the Samsung DigitALL logo appears on the screen2. Press the SUBTITLE button on your remote control3. Using your remote control enter the code: 7, 6, 8, 8, 4Note: You should not see the numbers on screen as you type themIf you do Turn off and start again.4. The current region should be displayed on the screen. (eg "04") If this doesn't happen then turn offand then on and try again5. Press the 9 button on your remote control for Region free6. Press the Open button on your player7. Close Tray.8. Power the unit off, then power the unit on againRegion code hack posted by paddy, June 03 2003:the previous hack works well and to get round the macrovision i found connecting to my other samsung player works well if trying to do a copy it seems to cut the copy rights out somehow between the 2 players i will look into it further but so far works wellRegion code hack posted by Bob, May 10 2005:1. Press the DVD button on your remote (the Samsung logo appears)2. Press the SUBTITLE button on your remote3. With your remote enter the code: 575384. The current region is displayed on the top left corner of the screen. (e.g. 2)5. Press 9 on your remote (Region free)6. Again press the SUBTITLE button on your remote7. Open & close the tray twice using your remote8. Power off and then on the unit9. Enjoy the Region free playerRegion code hack posted by george, January 08 2006:1. Press the DVD button on your remote (the Samsung logo appears)2. Press the SUBTITLE button on your remote3. With your remote enter one of the following codes corresponding to your current RC setting:RC 1: 29334RC 2: 38767(or 57538)RC 3: 56732RC 4: 76884RC 5: 53814RC 6: 24462Current RC should be displayed on the top left corner of the screen. (e.g. 2)5. Press 9 on your remote (Region free)6. Again press the SUBTITLE button on your remote7. Open & close the tray twice using your remote8. Power off and then on the unit9. Enjoy the Region free playerThanx for the recouces: [url]http://www.dvddemystifiziert.de/codefree_en/samsung.htmlandhttp://www.videohelp.com/dvdhacks.php?dvdplayer=S[/url] ... rch=SearchRegion code hack posted by Flem, January 10 2007:Samsung DVD-V3401. Press the DVD button on your remote (the Samsung logo appears)2. Press the SUBTITLE button on your remote3. With your remote enter one of the following codes corresponding to your current RC setting:RC 1: 29334RC 2: 38767(or 57538)RC 3: 56732RC 4: 76884RC 5: 53814RC 6: 24462Current RC should be displayed on the top left corner of the screen. (e.g. 2)5. Press 9 on your remote (Region free)6. Again press the SUBTITLE button on your remote7. Open & close the tray twice using your remote8. Power off and then on the unit9. Enjoy the Region free player































[url=http://www.videohelp.com/dvdhacks?dvdplayer=Samsung+DVD-V6500&hits=50&Search=Search]www.videohelp.com[/url]

[clovisclovis]

Always perform a COLD START before applying the hack below. This is an essential step. This hack can be used on player model v5000 as well.1. Power on your player as normal.2. Press and hold both the Play and Forward buttons on the player.3. After a short while the words "No Disc" should appear from the onscreen display Release the Play and Forward buttons as soon as you see the words no disk.4. First press the "Subtitle", then press the "Repeat" button on your remote control.5. Using your remote control enter the code below, note that you must know what Region your player is currently set to in order to know which code is appropriate:- Region 1 use [ 2, 9, 3, 3, 4 ]- Region 2 use [ 3, 8, 7, 6, 7 ]- Region 3 use [ 5, 6, 7, 3, 2 ]- Region 4 use [ 7, 6, 8, 8, 4 ]- Region 5 use [ 5, 3, 8, 1, 4 ]- Region 6 use [ 2, 4, 4, 6, 2 ]6. A code should be displayed at the upper left of the screen showing the current Region setting of your unit.7. Press the "9" button on your remote control for Region free, or "1" for Region 1. Press "2" for Region 2, and so on.8. Press the Open button on your player, put a DVD movie. Don't press CLOSE!!!9. Press the Standby button on your remote control.10. Press Standby again, and wait untill u see the Samsung Digitall logo, press the PLAY button, and here you go, your movie should start now.