Hoods are all fitted basically the same and easy to install- they need to be fitted no less than 700mm above the hob....if its the chimney type? draw a level line on the wall no less than700mm above hob, offer up the extractor to your position marks and mark the position of the mounting holes - at least 4.... secure the extractor to the wall.... offer up chimney and mark position of chimney fitting bracket...fit bracket to wall...
The power to the extractor should be via a connection unit hidden by the chimney.... Connect up extractor fit chimney(will be in 2 parts telescopic)
Other type without chimney normaly simply fits below a wall unit
|